To help people planning to start 5 gallon bottle cap business to know well how to choose a good mould, there are 5 tips offered by experienced SINOPK - has delivered hundreds of high performance 5 gallon water bottle cap moulds. With a sharp focus on the specific needs of the 5 gallon bottle cap industry, SINOPK has supported customers with continual innovative solutions in bringing caps successfully to their market.

1.       Excellent Mould Design.

It is the key tip for checking that if you will get the ideal 5 gallon water bottle cap mould.

And there would be at least two aspects for confirming if the mould maker could offer the excellent mould design:

-           Knows well about the specification of 5 gallon water bottle cap

Such as: The mould ejector design is based on how the tear tape of 5 gallon water bottle cap is.

-          Knows well about the customers’ demand

Such as: cost saving but high quality - suitable thickness for no splash, no leak and sealing strong than general caps; faster cycle time by optimal cooling and air venting system.

2.       Best Mould Steel.

Except the mould design, the second point shall be the mould steel, as we can see that the mould can not work when the mould steel is terrible even if use the top 1 mould design.

And what’s the best steel? Actually, the suitable steel with the affordable cost is the best one. As mould designers keep it in mind, they have already suggested the most suitable steel for every mould part when designing. Then if the total cost much higher than the budget of customers, the SINOPK team would analysis and offer the other solutions to ensure the good quality that customers would like it be.

After the first two tips, then it would be considerable to think that how to make the agreed mould design to real perfect mould. They are also the final three tips following:

3.       Precision Mould Tooling.

5 gallon water bottle cap mould requires no-stop and mass production, so the dimension of every part in mould is of importance, which requires the high tooling performance of tooling equipment.

So if you are looking for a reliable manufacturer for your 5 gallon water bottle cap mould, let them show you their tooling equipment for reference too.

And welcome to check ours here: SINOPK mould tooling equipment.

4.       Rigorous QC

Rigorous Mould Quality Control - Higher efficiency for shorter delivery time but longer life time - must be considered to make your investment work.

Ask the mould suppliers to show you how they do their QC for 5 gallon water bottle cap mould, and then you will see the difference of them.

5.       Necessary Mould Mass Production Simulation

This is additional QC much more convincing, which is necessary in SINOPK. The running time would be at least 8 hours, and the team would try to make the production condition similar to yours, so both of us could be confidence of your production will be fully win.

SINOPK aims to make 5 gallon water bottle cap mould as good as possible for you, the five tips are not detailed enough, so if you’ve any questions, please get in touch with us, and we will show you more and help to find the best solution for your 5 gallon water bottle caps.